| Param | Original file | Final file |
|---|---|---|
| Filename | modeM0/AS1A12_100T01_9000005628cztM0_level2.fits | modeM0/AS1A12_100T01_9000005628cztM0_level2_quad_clean.evt |
| Size (bytes) | 45,656,640 | 47,537,280 |
| Size | 43.5 MB | 45.3 MB |
| Events in quadrant A | 268,754 | 282,080 |
| Events in quadrant B | 255,002 | 275,110 |
| Events in quadrant C | 261,986 | 266,880 |
| Events in quadrant D | 230,636 | 248,095 |
| Mode M9 | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 20 | 0 |
| B | 0 | 20 | 0 |
| C | 0 | 20 | 0 |
| D | 0 | 21 | 0 |
| Mode M0 | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 11365 | 0 |
| B | 0 | 11797 | 0 |
| C | 0 | 10822 | 0 |
| D | 0 | 11277 | 0 |
| Mode SS | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 108 | 0 |
| B | 0 | 108 | 0 |
| C | 0 | 108 | 0 |
| D | 0 | 108 | 0 |
| Quadrant | Total seconds | Saturated seconds | Saturation percentage |
|---|---|---|---|
| A | 5228 | 15 | 0.286917% |
| B | 5228 | 112 | 2.142311% |
| C | 5228 | 31 | 0.592961% |
| D | 5228 | 47 | 0.899005% |
Noise dominated data is calculated using 1-second bins in cleaned event files. If a bin has >2000 counts, and if more than 50% of those come from <1% of pixels, then it is considered to be noise-dominated and hence unusable.
| Quadrant | # 1 sec bins | Bins with >0 counts | Bins with >2000 counts | High rate bins dominated by noise | Noise dominated (total time) | Noise dominated (detector-on time) | Marked lightcurve |
|---|---|---|---|---|---|---|---|
| A | 6540 | 5227 | 0 | 0 | 0.00% | 0.00% |  |
| B | 6539 | 5224 | 0 | 0 | 0.00% | 0.00% |  |
| C | 6540 | 5227 | 0 | 0 | 0.00% | 0.00% |  |
| D | 6540 | 5226 | 0 | 0 | 0.00% | 0.00% |  |
Top three noisy pixels from each quadrant. If the there are fewer than three noisy pixels in the level2.evt file, extra rows are filled as -1
| Pixel properties | Quadrant properties | ||||||
|---|---|---|---|---|---|---|---|
| Quadrant | DetID | PixID | Counts | Sigma | Mean | Median | Sigma |
| A | 9 | 19 | 242 | 9.01 | 70 | 66 | 19.5 |
| A | 14 | 79 | 222 | 7.99 | 70 | 66 | 19.5 |
| A | 14 | 95 | 208 | 7.27 | 70 | 66 | 19.5 |
| B | 2 | 9 | 218 | 10.0 | 67 | 64 | 15.4 |
| B | 3 | 80 | 192 | 8.31 | 67 | 64 | 15.4 |
| B | 3 | 17 | 188 | 8.05 | 67 | 64 | 15.4 |
| C | 3 | 202 | 218 | 7.75 | 69 | 65 | 19.8 |
| C | 1 | 81 | 205 | 7.09 | 69 | 65 | 19.8 |
| C | 3 | 203 | 195 | 6.58 | 69 | 65 | 19.8 |
| D | 7 | 3 | 185 | 6.6 | 65 | 60 | 18.9 |
| D | 6 | 38 | 185 | 6.6 | 65 | 60 | 18.9 |
| D | 4 | 160 | 180 | 6.33 | 65 | 60 | 18.9 |
Histogram calculated using DETX and DETY for each event in the final _common_clean file
| Quadrant A |  |
 |
Quadrant B |
|---|---|---|---|
| Quadrant D |  |
 |
Quadrant C |
| Plot type | Count rate plots | Images |
|---|---|---|
| Comparison with Poisson distribution Blue bars denote a histogram of data divided into 1 sec bins. Red curve is a Poisson curve with rate = median count rate of data. |
 |
 |
| Quadrant-wise count rates Data is divided into 100 sec bins |
 |
|
| Module-wise count rates for Quadrant A Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant B Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant C Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant D Data is divided into 100 sec bins |
 |
 |
| Parameter | Plot |
|---|---|
| CZT HV Monitor |  |
| D_VDD |  |
| Temperature 1 |  |
| Veto HV Monitor |  |
| Veto LLD |  |
| Alpha Counter |  |
| _CPM_Rate |  |
| CZT Counter |  |
| +2.5 Volts monitor |  |
| +5 Volts monitor |  |
| _ROLL_ROT |  |
| _Roll_DEC |  |
| _Roll_RA |  |
| Veto Counter |  |