| Param | Original file | Final file |
|---|---|---|
| Filename | modeM0/AS1P01_999T99_9000000132cztM0_level2.fits | modeM0/AS1P01_999T99_9000000132cztM0_level2_quad_clean.evt |
| Size (bytes) | 14,886,720 | 15,534,720 |
| Size | 14.2 MB | 14.8 MB |
| Events in quadrant A | 83,596 | 85,826 |
| Events in quadrant B | 82,822 | 86,918 |
| Events in quadrant C | 79,834 | 84,548 |
| Events in quadrant D | 69,738 | 77,293 |
| Mode M0 | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 7664 | 0 |
| B | 0 | 8041 | 0 |
| C | 0 | 7133 | 0 |
| D | 0 | 6779 | 0 |
| Mode SS | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 36 | 0 |
| B | 0 | 36 | 0 |
| C | 0 | 36 | 0 |
| D | 0 | 36 | 0 |
| Quadrant | Total seconds | Saturated seconds | Saturation percentage |
|---|---|---|---|
| A | 1850 | 0 | 0.000000% |
| B | 1850 | 0 | 0.000000% |
| C | 1850 | 1 | 0.054054% |
| D | 1850 | 0 | 0.000000% |
Noise dominated data is calculated using 1-second bins in cleaned event files. If a bin has >2000 counts, and if more than 50% of those come from <1% of pixels, then it is considered to be noise-dominated and hence unusable.
| Quadrant | # 1 sec bins | Bins with >0 counts | Bins with >2000 counts | High rate bins dominated by noise | Noise dominated (total time) | Noise dominated (detector-on time) | Marked lightcurve |
|---|---|---|---|---|---|---|---|
| A | 1850 | 1850 | 0 | 0 | 0.00% | 0.00% |  |
| B | 1849 | 1849 | 0 | 0 | 0.00% | 0.00% |  |
| C | 1849 | 1849 | 0 | 0 | 0.00% | 0.00% |  |
| D | 1849 | 1849 | 0 | 0 | 0.00% | 0.00% |  |
Top three noisy pixels from each quadrant. If the there are fewer than three noisy pixels in the level2.evt file, extra rows are filled as -1
| Pixel properties | Quadrant properties | ||||||
|---|---|---|---|---|---|---|---|
| Quadrant | DetID | PixID | Counts | Sigma | Mean | Median | Sigma |
| A | 7 | 110 | 81 | 8.69 | 21 | 20 | 7.0 |
| A | 0 | 29 | 71 | 7.27 | 21 | 20 | 7.0 |
| A | 9 | 191 | 62 | 5.99 | 21 | 20 | 7.0 |
| B | 2 | 9 | 79 | 9.61 | 21 | 21 | 6.0 |
| B | 5 | 225 | 60 | 6.46 | 21 | 21 | 6.0 |
| B | 2 | 18 | 60 | 6.46 | 21 | 21 | 6.0 |
| C | 3 | 202 | 62 | 6.14 | 21 | 19 | 6.9 |
| C | 3 | 235 | 60 | 5.85 | 21 | 19 | 6.9 |
| C | 1 | 80 | 59 | 5.71 | 21 | 19 | 6.9 |
| D | 1 | 25 | 63 | 7.08 | 19 | 18 | 6.4 |
| D | 3 | 14 | 61 | 6.77 | 19 | 18 | 6.4 |
| D | 1 | 26 | 61 | 6.77 | 19 | 18 | 6.4 |
Histogram calculated using DETX and DETY for each event in the final _common_clean file
| Quadrant A |  |
 |
Quadrant B |
|---|---|---|---|
| Quadrant D |  |
 |
Quadrant C |
| Plot type | Count rate plots | Images |
|---|---|---|
| Comparison with Poisson distribution Blue bars denote a histogram of data divided into 1 sec bins. Red curve is a Poisson curve with rate = median count rate of data. |
 |
 |
| Quadrant-wise count rates Data is divided into 100 sec bins |
 |
|
| Module-wise count rates for Quadrant A Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant B Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant C Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant D Data is divided into 100 sec bins |
 |
 |
| Parameter | Plot |
|---|---|
| CZT HV Monitor |  |
| D_VDD |  |
| Temperature 1 |  |
| Veto HV Monitor |  |
| Veto LLD |  |
| Alpha Counter |  |
| _CPM_Rate |  |
| CZT Counter |  |
| +2.5 Volts monitor |  |
| +5 Volts monitor |  |
| _ROLL_ROT |  |
| _Roll_DEC |  |
| _Roll_RA |  |
| Veto Counter |  |