| Param | Original file | Final file |
|---|---|---|
| Filename | modeM0/AS1A13_093T30_9000006328_47447cztM0_level2.fits | modeM0/AS1A13_093T30_9000006328_47447cztM0_level2_quad_clean.evt |
| Size (bytes) | 112,354,560 | 27,702,720 |
| Size | 107.1 MB | 26.4 MB |
| Events in quadrant A | 1,847,785 | 180,519 |
| Events in quadrant B | 751,180 | 192,357 |
| Events in quadrant C | 682,042 | 183,575 |
| Events in quadrant D | 755,104 | 168,494 |
| Mode SS | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 30 | 0 |
| B | 0 | 30 | 0 |
| C | 0 | 30 | 0 |
| D | 0 | 30 | 0 |
| Mode M0 | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 6612 | 1 |
| B | 0 | 3200 | 1 |
| C | 0 | 3130 | 1 |
| D | 0 | 3282 | 1 |
| Quadrant | Total seconds | Saturated seconds | Saturation percentage |
|---|---|---|---|
| A | 1545 | 116 | 7.508091% |
| B | 1545 | 2 | 0.129450% |
| C | 1546 | 0 | 0.000000% |
| D | 1546 | 6 | 0.388098% |
Noise dominated data is calculated using 1-second bins in cleaned event files. If a bin has >2000 counts, and if more than 50% of those come from <1% of pixels, then it is considered to be noise-dominated and hence unusable.
| Quadrant | # 1 sec bins | Bins with >0 counts | Bins with >2000 counts | High rate bins dominated by noise | Noise dominated (total time) | Noise dominated (detector-on time) | Marked lightcurve |
|---|---|---|---|---|---|---|---|
| A | 1545 | 1545 | 48 | 48 | 3.11% | 3.11% |  |
| B | 1545 | 1545 | 1 | 1 | 0.06% | 0.06% |  |
| C | 1546 | 1546 | 0 | 0 | 0.00% | 0.00% |  |
| D | 1546 | 1546 | 6 | 6 | 0.39% | 0.39% |  |
Top three noisy pixels from each quadrant. If the there are fewer than three noisy pixels in the level2.evt file, extra rows are filled as -1
| Pixel properties | Quadrant properties | ||||||
|---|---|---|---|---|---|---|---|
| Quadrant | DetID | PixID | Counts | Sigma | Mean | Median | Sigma |
| A | 10 | 83 | 1109552 | 29012.89 | 176 | 173 | 38.2 |
| A | 9 | 191 | 56248 | 1466.49 | 176 | 173 | 38.2 |
| A | 13 | 254 | 2384 | 57.82 | 176 | 173 | 38.2 |
| B | 14 | 167 | 13453 | 362.68 | 179 | 175 | 36.6 |
| B | 0 | 198 | 8010 | 214.01 | 179 | 175 | 36.6 |
| B | 5 | 171 | 5826 | 154.35 | 179 | 175 | 36.6 |
| C | 0 | 207 | 13475 | 320.14 | 170 | 171 | 41.6 |
| C | 3 | 233 | 2696 | 60.76 | 170 | 171 | 41.6 |
| C | 1 | 3 | 2657 | 59.82 | 170 | 171 | 41.6 |
| D | 13 | 23 | 20151 | 443.69 | 170 | 164 | 45.0 |
| D | 8 | 176 | 14891 | 326.92 | 170 | 164 | 45.0 |
| D | 7 | 55 | 14045 | 308.14 | 170 | 164 | 45.0 |
Histogram calculated using DETX and DETY for each event in the final _common_clean file
| Quadrant A |  |
 |
Quadrant B |
|---|---|---|---|
| Quadrant D |  |
 |
Quadrant C |
| Plot type | Count rate plots | Images |
|---|---|---|
| Comparison with Poisson distribution Blue bars denote a histogram of data divided into 1 sec bins. Red curve is a Poisson curve with rate = median count rate of data. |
 |
 |
| Quadrant-wise count rates Data is divided into 100 sec bins |
 |
|
| Module-wise count rates for Quadrant A Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant B Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant C Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant D Data is divided into 100 sec bins |
 |
 |
| Parameter | Plot |
|---|---|
| CZT HV Monitor |  |
| D_VDD |  |
| Temperature 1 |  |
| Veto HV Monitor |  |
| Veto LLD |  |
| Alpha Counter |  |
| _CPM_Rate |  |
| CZT Counter |  |
| +2.5 Volts monitor |  |
| +5 Volts monitor |  |
| _ROLL_ROT |  |
| _Roll_DEC |  |
| _Roll_RA |  |
| Veto Counter |  |