| Param | Original file | Final file |
|---|---|---|
| Filename | modeM0/AS1T05_218T01_9000006386_48020cztM0_level2.fits | modeM0/AS1T05_218T01_9000006386_48020cztM0_level2_quad_clean.evt |
| Size (bytes) | 139,377,600 | 34,508,160 |
| Size | 132.9 MB | 32.9 MB |
| Events in quadrant A | 2,029,896 | 226,356 |
| Events in quadrant B | 935,661 | 236,062 |
| Events in quadrant C | 1,048,113 | 221,012 |
| Events in quadrant D | 970,795 | 201,723 |
| Mode SS | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 44 | 0 |
| B | 0 | 44 | 0 |
| C | 0 | 44 | 0 |
| D | 0 | 44 | 0 |
| Mode M0 | |||
|---|---|---|---|
| Quadrant | BADHDUFLAG | Total packets | Discarded packets |
| A | 0 | 7369 | 0 |
| B | 0 | 4437 | 0 |
| C | 0 | 4715 | 0 |
| D | 0 | 4605 | 0 |
| Quadrant | Total seconds | Saturated seconds | Saturation percentage |
|---|---|---|---|
| A | 2214 | 7 | 0.316170% |
| B | 2215 | 2 | 0.090293% |
| C | 2215 | 12 | 0.541761% |
| D | 2215 | 9 | 0.406321% |
Noise dominated data is calculated using 1-second bins in cleaned event files. If a bin has >2000 counts, and if more than 50% of those come from <1% of pixels, then it is considered to be noise-dominated and hence unusable.
| Quadrant | # 1 sec bins | Bins with >0 counts | Bins with >2000 counts | High rate bins dominated by noise | Noise dominated (total time) | Noise dominated (detector-on time) | Marked lightcurve |
|---|---|---|---|---|---|---|---|
| A | 2214 | 2214 | 1 | 1 | 0.05% | 0.05% |  |
| B | 2215 | 2215 | 0 | 0 | 0.00% | 0.00% |  |
| C | 2215 | 2215 | 7 | 7 | 0.32% | 0.32% |  |
| D | 2215 | 2215 | 8 | 8 | 0.36% | 0.36% |  |
Top three noisy pixels from each quadrant. If the there are fewer than three noisy pixels in the level2.evt file, extra rows are filled as -1
| Pixel properties | Quadrant properties | ||||||
|---|---|---|---|---|---|---|---|
| Quadrant | DetID | PixID | Counts | Sigma | Mean | Median | Sigma |
| A | 10 | 83 | 1122821 | 22292.18 | 233 | 228 | 50.4 |
| A | 7 | 3 | 3324 | 61.48 | 233 | 228 | 50.4 |
| A | 13 | 254 | 3291 | 60.82 | 233 | 228 | 50.4 |
| B | 12 | 111 | 5934 | 118.25 | 234 | 226 | 48.3 |
| B | 11 | 111 | 5675 | 112.88 | 234 | 226 | 48.3 |
| B | 14 | 111 | 5430 | 107.81 | 234 | 226 | 48.3 |
| C | 12 | 2 | 62944 | 1112.39 | 233 | 234 | 56.4 |
| C | 14 | 254 | 41536 | 732.64 | 233 | 234 | 56.4 |
| C | 14 | 67 | 13203 | 230.05 | 233 | 234 | 56.4 |
| D | 11 | 224 | 63454 | 1075.77 | 230 | 223 | 58.8 |
| D | 14 | 34 | 22402 | 377.34 | 230 | 223 | 58.8 |
| D | 2 | 234 | 10910 | 181.82 | 230 | 223 | 58.8 |
Histogram calculated using DETX and DETY for each event in the final _common_clean file
| Quadrant A |  |
 |
Quadrant B |
|---|---|---|---|
| Quadrant D |  |
 |
Quadrant C |
| Plot type | Count rate plots | Images |
|---|---|---|
| Comparison with Poisson distribution Blue bars denote a histogram of data divided into 1 sec bins. Red curve is a Poisson curve with rate = median count rate of data. |
 |
 |
| Quadrant-wise count rates Data is divided into 100 sec bins |
 |
|
| Module-wise count rates for Quadrant A Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant B Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant C Data is divided into 100 sec bins |
 |
 |
| Module-wise count rates for Quadrant D Data is divided into 100 sec bins |
 |
 |
| Parameter | Plot |
|---|---|
| CZT HV Monitor |  |
| D_VDD |  |
| Temperature 1 |  |
| Veto HV Monitor |  |
| Veto LLD |  |
| Alpha Counter |  |
| _CPM_Rate |  |
| CZT Counter |  |
| +2.5 Volts monitor |  |
| +5 Volts monitor |  |
| _ROLL_ROT |  |
| _Roll_DEC |  |
| _Roll_RA |  |
| Veto Counter |  |